UPDATE RESEARCH RATE RESEARCH OPDKIL
CH UPDATE
From
KRYPTONICS
ary Takes
Only Kryptonics, the most
advanced Urethane manufacturer in the
world, uses the ultimate in RAW CHEMICALS to
bring you wheels that take you beyond your limits. The
Kryptonics Lab puts Radical Science on your side with specially
formulated properties developed from our Urethanes, never from
pre-mixed compounds. The result-absolute
quits
Double Radius
Ramp and street
Styling shape
Ultimate Urethanes
High rebound formulations
for total skate
C-70
H
Diameter: 70mm x 46mm
Weight: 156 grams
Colors: red, blue
Durometer: 78A
Backside configuration:
flat back with radius front
KRYPTO-SUPERLITE™
Diameter 62mm x 45mm
Weight: 89 grams
Colors: pink, natural, black
Durometer: 94A
Backside configuration:
double radius. center
bearing with core
perfection in performance.
Hard core technology is the key.
Our super tough core is made to
last from engineering grade,
glass reinforced nylon-
giving your bearings precise alignment. Our precision
built core minimizes wheel reaction time...pushing
speed to the max.
Kryptonics' highly resilient Urethanes defy
gravity and resist destruction. From lite weight
(89 gms) to high rebound (82%), you won't find
hotter Urethanes anywhere in the
get guts
world. Developed specifically for
skateboard applica-
tions, these formulas
give you the speed
and stability to cut loose.
get glory
63.5 c™
Diameter: 63.5mm x 50mm
Weight: 125 grams
Colors: red, black, greep, pink,
blue, natural, yellow, purple
Durometer: 85A
Backside configuration:
radius backside, center
bearing with core
KRYPTONICS, INC.
5660 Central Avenue Boulder, Colorado 80301 303-442-9173 Telex 45-4432
1985 Kryptonics, Inc.
get kryptonics
KRYPTO-LITE™
Diameter: 62mm x 45mm
Weight: 106 grams
Colors: red black, green, pink
blue, natural, yellow, purple
Durometer 95A
Backside configuration
double radius, center
bearing with core
29
By Rob Roskopp
Frontside Boneless On Vertical
1. When first trying this maneuver it's best
to act it out on the street, to get the feel.)
then concentrate on making it.
2. Approach the lip like you would on a
frontside air
3. Grab your left rail (or right rail if you're
regular foot) at the same time take you front
foot off, leaning a bit back.
4. Thrust with your front foot while swinging
your board and body in a 180° fashion.
5. Right as your board levels out, concen-
trate on putting your front foot back on
board. (Be careful, becuase sometimes
your toe might catch the rail or your board.
This means you're too compressed, plus
you'll eat shit bad.)
8. Once your foot is back on the board,
compress slightly for landing,
7. After successfully making this maneuver,
practice on going higher and carving more.
Good luck & keep skating
Rob
KRYPTONICS
Jett Philips blasting a mean boneless one at the
Mobile hangar